Written by : Nick
02-02-2022
Swing gate closing-reopening
Resolving Swing Gate Issues with Photocells: A Step-by-Step Guide
Swing gates without a stopper in the middle can encounter problems. One common issue is the gate closing and then reopening. Here’s why this happens and how to fix it.
Understanding the Problem
The gate closes too far and crosses the safety beam line. This triggers the gate to reopen for safety reasons.
Step 1: Identify the Safety Beam Line
First, locate the safety beam line of your swing gate. This is crucial for understanding where the issue occurs.
Step 2: Observe Gate Movement
Watch the gate as it closes. Notice if it crosses the safety beam line. This helps confirm the problem.
Step 3: Adjust the Gate Stopper
You need to adjust the gate stopper. This ensures the gate stops at the correct position and doesn’t cross the safety beam line.
Step 4: Test the Adjustment
After adjusting the gate stopper, test the gate. Close it to see if it stays closed without reopening.
Step 5: Fine-Tune the Stopper Position
If the gate still reopens, fine-tune the stopper position. Small adjustments can make a big difference.
Step 6: Ensure Photocell Alignment
Double-check the alignment of the photocells. Misaligned photocells can also cause the gate to malfunction.
Step 7: Perform a Final Test
Conduct a final test to ensure the gate now closes correctly. The gate should stop without crossing the safety beam line and stay closed.
Key Takeaways
Swing gates without a middle stopper can face issues with photocells. The gate may close too far, crossing the safety beam line and reopening. You can fix this by adjusting the gate stopper to the correct position. Ensure the photocells are properly aligned for optimal performance.
By following these steps, you can resolve swing gate issues and ensure smooth operation. Proper adjustment and alignment are key to preventing the gate from reopening.
Contact Sesame Gate Automation Experts to discuss anything about automatic gate.
Swing gate closing and reopening